Tools & ANCILLARIES

DTW300 is a cordless impact wrench powered by 18V LXT Li-Ion battery

Our tool belts are specifically designed to withstand the ‘wear and tear’ of everyday use. The belts and components are designed and manufactured to a high specification using extremely robust leather. Whether you are a scaffolder, builder, joiner, steel erector or even an engineer, our tool belts can accommodate a multitude of tools and equipment.

Easy Read 5m/16ft pocket ‘budget’ tape features a magnetic hook and a belt hook

This compact bevelled shaped level has a die-cast aluminium body which makes it one of the sturdiest levels that STABILA makes. This level is for all those who need both hands free when aligning and levelling on steel frame structures. The 81 S REM Torpedo has a rare earth magnet system with extra strong holding-power. The vials are precisely aligned with the milled measuring surface then locked together. This gives you years of accurate levelling.

Our tough scaffold fitting bags are designed for 20-25 scaffold fittings and have a safe working load of 30kg. They are stamped “SWL 30KG” which is ideal for sites where the safe working load must be printed clearly on the bag.

Our welded Excalibur scaffolding ring bolts are used in a variety of scaffolding applications where standard eye bolts cannot be used. It is a 1 piece anchor, which means when the bolt is removed, it leaves nothing in the wall that could lead to rust.

Our welded Excalibur scaffolding ring bolts are used in a variety of scaffolding applications where standard eye bolts cannot be used. It is a 1 piece anchor, which means when the bolt is removed, it leaves nothing in the wall that could lead to rust.

The Thunderbolt Screwbolt, eliminating the need for Expansion Anchors or Chemical Systems.

Can be screwed directly into a hole drilled in the substrate.

Available in 75mm, 100mm and 150mm lengths

This innovative clamp enables you to lift and lower corrugated iron roofing sheets up to multi levels with ease! on or off SCAFFOLDING TEMPORARY ROOFS It’s so simple just use a standard scaffold spanner to secure and release the clamp on to as many as 6 sheets at a time

For use under base plates, the Tredda Plates protect the base plate from damage.

Designed to protect operatives and pedestrians from unnecessary injury, the end caps are a great way to ensure maximum health and safety.

NP14 is a lightweight nylon fixing, normally used in conjunction with the SCE restraint eye or a 12mm diameter screw in a variety of base materials. The short (75mm) version comes with or without a rim (as required). There are longer lengths available, 100mm & 135mm, designed for rendered face or insulated surfaces.

A light to standard duty through fixing used predominately in the Scaffold & Access market to secure scaffolding, cables, chains, ladders etc. Can be used in conjunction with a variety of 14mm nylon plugs for applications in concrete, solid bricks, hollow bricks, perforated bricks, aircrete, blocks etc. and timber (without plugs).

Dimensions
Gauge – M12
Shank & Thread Length (combined) – 90mm
Eye ID – 23mm
Thread Length Only – 65mm

A light to standard duty through fixing used predominately in the Scaffold & Access market to secure scaffolding, cables, chains, ladders etc. Can be used in conjunction with a variety of 14mm nylon plugs for applications in concrete, solid bricks, hollow bricks, perforated bricks, aircrete, blocks etc. and timber (without plugs).

Dimensions
Gauge – M12
Shank & Thread Length (combined) – 300mm
Eye ID – 23mm
Thread Length Only – 65mm